Domestic MVHR

Vireo 155 WM

Vireo 155WM is a heat recovery unit designed to enable better and easier specification of ventilation in new properties. It contains features such as its automatic true summer by-pass, high heat recovery efficiency and integrated humidity sensor to provide a comfortable, healthy and energy-efficient indoor climate.

Ideal for small houses and apartments up to 110m2

  • This ventilation unit has been designed to fit into a kitchen cupboard for easy access and installation.

  • Greenwood Smart Technology is included with commissioning wizard (set up vireo in 8 simple steps via the wizard).

  • EST Best Practice Performance – 93% heat efficiency and 0.75w/l/s

  • Excellent pressure handling allowing lower running speeds and low noise.

  • Vireo 155 WM is listed on the SEAI Triple E Register approved for energy efficiency

 

Vireo 155CM

Ideal for low profile applications where space is at a premium, Vireo HR 155CM is loaded with Greenwood SMART technology ensuring installer happiness and long term performance and reliability.

  • Up to 93% heat exchange efficiency

  • Suitable for horizontal mounting in apartments and small houses up to 100m2

  • Energy efficient EC motors

  • 100% variable airflow set-up

  • Rotating condensate connection for flexible installation

  • Designed with class leading compact dimensions – a solution for ceiling voids

  • Innovative commissioning wizard allowing set-up in 8 simple steps

  • Vireo 155 CM is listed on the SEAI Triple E Register approved for energy efficiency

 

ComfoAir 180

 

Zehnder ComfoAir 180 heat recovery ventilation system is an ultra compact unit which is highly suited to renovation projects for flats or apartments.

  • Designed specifically for flats and apartments up to 105m2

  • Comfort ventilation up to 180m3/h at 160 Pa

  • Heat recovery efficiency of up to 95%

  • Low energy consumption thanks to highly efficient EC motots

  • Automatic 100% filtered summer bypass

  • Compact dimensions making CA180 ideal for installation in a kitchen or bathroom

  • The Unit can be left or right handed

  • Offers particular benefits for refurbishment projects

  • Features an additional supply air connection at the bottom of the unit for added installation flexibility

  • ComfoAir 180 is a certified Passive House component

  • ComfoAir 180 is listed on the SEAI Triple E Register approved as being energy efficient

 
Vireo 185.JPG

Vireo 185WM

Ideal ventilation for small to medium homes. Vireo HR185WM is loaded with Greenwood SMART technology ensuring installer happiness and long term performance and reliability.

  • Up to 92% heat exchange efficiency

  • Suitable for vertical mounting in apartments and small house up to 120m2

  • Energy efficient EC motors

  • 100% variable airflow set-up

  • Designed with class leading slimline dimensions – a solutions for tallboys and airing cupboards

  • Market leading installation time

  • Innovative commissioning wizard allowing set up in 8 simple steps

  • Vireo 185 WM is listed on the SEAI Triple E Register approved for energy efficiency

 

ComfoAir 200

Designed for excellent efficiency and installation in smaller homes or apartments, ComfoAir 200 comfort ventilation unit can be mounted vertically or horizontally. With a maximum capacity of 125 cfm, the CA 200 has been certified at 92% efficiency by the Passive House Institute. Features include ECM motors for energy efficiency and ease of balancing, summer by-pass cooling, frost protection mode, and optional resistance pre-heater and ERV option. Additional options and accessories also available. The CA 200 is a Certified Passive House Component.

  • Comfort ventilation up to a duty of 200 m³/h

  • Heat recovery with a heat recovery efficiency of up to 95%

  • Low power consumption thanks to EC direct current motors

  • Automatic 100% summer bypass

  • Infinitely variable frost protection function:efficient even at low temperatures

  • Integrated preheater (optional)

  • Wireless remote control available

  • Digital Ease control unit

  • CO2 control (optional)

  • With weekly timer as standard

  • ComfoAir 200 is a certified Passive House component

  • ComfoAir 200 is listed on the SEAI Triple E Register approved as being energy efficient

 

Paul Focus 200 MVHR

Central Ventilation device with

heat recovery

Paul Focus 200 MVHR unit is used for controlled room ventilation (air flow rate: 60 to 200 m³/h). The unit is a Passive House certified heat recovery unit with a rate up to 91% in an electric efficiency of 0.31 Wh/m3. It is equipped with a highly efficient reverse flow duct heat exchanger (European patent). Its compact design – a right or left side version of the unit is available – offers an easy installation and an optimal routing of air ducts. The MVHR unit can be used for ventilation in all living areas up to 150 m².

  • For dwellings up to 150 m² floor area

  • Optional with humidity recovery (enthalpy exchanger)

  • The unit comes with a summer ventilation function

  • equipped as standard with intake air filter and extract air filter, optional pollen filter.

  • Its control panel is a TFT touch panel with colour display with an optional LED control panel.

  • Casing of galvanised powder-coated sheet steel, high quality polypropylene internal lining for high heat insulation and good device noise protection.

  • Focus 200 is a certified Passive House component

  • Focus 200 is listed on the SEAI Triple E Register approved for energy efficiency

 
Paul Climos 200

Paul Climos 200

Paul Climos 200F HRV unit is a Passive House certified MVHR unit.

The HRV unit is a Compact Heat Recovery Unit for central comfort ventilation. The equipment as standard comes with an enthalpy heat exchanger, (humidity exhanger) with selective polymer membrane, which eliminates the need for a condensate drain. The unit can therefore be installed horizontally in suspended ceilings or vertically in almost any configuration. This unit is especially adequate for new buildings and renovation with difficult installation points, with flat construction type for the false ceiling installation, customised drywall revision flap optional available.

  • Version ‘Comfort’ comes with integrated defroster and TFT touch panel as control unit

  • for dwellings up to 150 m2 floor area

  • Volume Flow Rate: 50 up to 200 m3/h

  • Version ‘Basic’ with integrated defroster, optionally with TFT touch panel or LED control panel

  • no condensate drain necessary

  • summer ventilation function

  • equipped as standard with intake air filter and extract air filter of the filter class G4, optional pollen filter F7

  • control panel: TFT touch panel with colour display, optional: LED control panel

  • casing of galvanised powder-coated sheet steel, high quality polypropylene internal lining for high heat insulation and good device noise protection

  • Climos 200 is a certified Passive House component

  • Climos 200 is listed on the SEAI Triple E Register approved for energy efficiency

 

Comfo Air 350

The new Zehnder ComfoAir Q range helps provide the best and most efficient heat recovery performance while offering a simple and easy process through design, installation and commissioning processes. Taking comfort to the next level the intuitive design of the system and its controls ensures that the indoor climate is perfect, no matter what is going on outside.

The ComfoAir Q units are also part of a total system solution for the best ventilation solution for a home – including zero leakage and space saving ducting options.

Benefits:

  • Available in three versions: max output 350, 450 and 600 m3/h

  • Suitable for medium and large size properties: up to 230m²

  • World Class Performance

  • Elimination of nuisance noise

  • Simple to Install

  • Convenient to commission

  • Improved Indoor Air Quality and mass flow constant (no dis-balancing and drop in performance over time)

  • Smart homeowner control with remote controllable via iPad and iPhone or computer

  • Easy Maintenance with maintenance free EC fans and filter warning according to state of filters

  • Passive House Certified

  • Option to use enthalpy heat exchanger

  • Best appendix Q performance – up to 96% heat recovery rate

 

Paul Novus 450 MVHR

Universal heat recovery unit for central ventilation

PAUL Novus 450 MVHR unit has the same dimensions as the Novus 300, but the air flow rate ranges from 50 to 450 m³/h. The unit is Passive house certified with a heat recovery rate up to 89%.

The heat recovery units have an automatic bypass control with motorised 100% bypass flap for summer bypass operation. The units can be mounted vertically or horizontally on wall bracket or floor standing frame for optimum space options.  They are equipped as standard with intake air filter and extract air filter and extremely low noise operation. The control panel is a TFT touch panel with colour display and optional LED feature.

  • The units come with optional features including Humidity Recovery and Integrated Defroster.

  • Novus 450 is suitable for dwelling up to 350m2 floor area (Novus 300 is available for up to 220m2 floor area)

  • Automatic bypass control with motorised 100% bypass flap for the summer bypass operation

  • Left and right unit version

  • Intake air filter and extract air filter of the filter Class G4, optional pollen filter F7

  • Casing of galavanised powder-coated sheet steel, high quality polypropylene internal lining for high heat insulation and good device noise protection

  • Novus 450 is a certified Passive House component

  • Novus 450 is listed on the SEAI Triple E Register approved for energy efficiency

 
ComfoAir 550

ComfoAir 550

ComfoAir 550 ventilation unit is the choice for large residential and small commercial projects or schools, with a maximum capacity of 325 cfm. ComfoAir 550 has all the features of our smaller capacity units, including ECM motors for energy efficiency and ease of balancing, summer by-pass cooling, frost protection mode, and optional resistance pre-heater and ERV option. Additional options and accessories also available. The CA 550 is a Certified Passive House Component.

  • Comfort ventilation for dutys up to 550 m³/h

  • Heat recovery with an efficiency of up to 95%

  • Moisture recovery with the Zehnder enthalpy exchanger (optional)

  • Low power consumption thanks to EC direct current motors

  • Automatic 100% summer bypass

  • Infinitely variable frost protection function: efficient even at low temperatures

  • Integrated preheater (optional)

  • Integrated controller for brine geothermal heat exchanger

  • Wireless remote control available

  • Digital Ease or Luxe control unit

  • With weekly timer as standard

  • ComfoAir 550 is a certified Passive House component

  • ComfoAir 550 is listed on the SEAI Triple E Register approved as being energy efficient

 

ComfoAir Range

The ComfoAir Q range helps provide the best and most efficient heat recovery performance while offering a simple and easy process through design, installation and commissioning processes. Taking comfort to the next level the intuitive design of the system and its controls ensures that the indoor climate is perfect, no matter what is going on outside.

The ComfoAir Q units are also part of a total system solution for the best ventilation solution for a home – including zero leakage and space saving ducting options.

Key Features of Zehnder ComfoAir Q Range

  • It comes in three versions: max output 350450 and 600 m3/h

  • Suitable for medium and large size properties: up to 230m²

  • World Class Performance

  • Elimination of nuisance noise

  • Technological innovation
    – new state of the art counter-flow heat exchanger
    – in-built humidity sensor
    – in-built modulated defrost pre-heater
    – modulated summer bypass

  • Simple to Install

  • Convenient to commission

  • Improved Indoor Air Quality and mass flow constant (no dis-balancing and drop in performance over time)

  • Smart homeowner control with remote controllable via iPad and iPhone or computer

  • Easy Maintenance with maintenance free EC fans and filter warning according to state of filters

  • Passive House Certified

  • Option to use enthalpy heat exchanger

  • Best appendix Q performance – up to 96% heat recovery rate

ComfoAir Q Heat Recovery units offer an outstanding and world class 96% heat recovery efficiency and SFP as low as 0.53 (Q450 model) as a result of a design that maximises heat transfer and helps overcome air resistance.

At every point the ComfoAir Q is the best choice - for SAP, for energy performance, for indoor air quality and importantly for the homeowner. Find out more about the technology that is driving this excellent performance and which also contributes to an easier commissioning process.

  • ComfoAir Q600 is a certified Passive House component

  • ComfoAir Q600 is listed on the SEAI Triple E Register approved for energy efficiency

 
ComfoAir Q

ComfoAir Q Range

The ComfoAir Q range helps provide the best and most efficient heat recovery performance while offering a simple and easy process through design, installation and commissioning processes. Taking comfort to the next level the intuitive design of the system and its controls ensures that the indoor climate is perfect, no matter what is going on outside.

The ComfoAir Q units are also part of a total system solution for the best ventilation solution for a home – including zero leakage and space saving ducting options.

Key Features of Zehnder ComfoAir Q Range

  • It comes in three versions: max output 350450 and 600 m3/h

  • Suitable for medium and large size properties: up to 230m²

  • World Class Performance

  • Elimination of nuisance noise

  • Technological innovation
    – new state of the art counter-flow heat exchanger
    – in-built humidity sensor
    – in-built modulated defrost pre-heater
    – modulated summer bypass

  • Simple to Install

  • Convenient to commission

  • Improved Indoor Air Quality and mass flow constant (no dis-balancing and drop in performance over time)

  • Smart homeowner control with remote controllable via iPad and iPhone or computer

  • Easy Maintenance with maintenance free EC fans and filter warning according to state of filters

  • Passive House Certified

  • Option to use enthalpy heat exchanger

  • Best appendix Q performance – up to 96% heat recovery rate

ComfoAir Q Heat Recovery units offer an outstanding and world class 96% heat recovery efficiency and SFP as low as 0.53 (Q450 model) as a result of a design that maximises heat transfer and helps overcome air resistance.

At every point the ComfoAir Q is the best choice - for SAP, for energy performance, for indoor air quality and importantly for the homeowner. Find out more about the technology that is driving this excellent performance and which also contributes to an easier commissioning process.

  • ComfoAir Q600 is a certified Passive House component

  • ComfoAir Q600 is listed on the SEAI Triple E Register approved for energy efficiency

Ventilation Components 

As more and more ventilation components and products come on the market, Versatile remains focused on providing you with quality products and services you can rely on and have the utmost confidence that our offering ensures reliability, quietness, efficiency, robustness and service.

A ducting system for whole house ventilation systems.

Zehnder Comfosystems have reinvented the concept of ducting with their ComfoFresh air distribution network and used their expertise to improve airflow, efficiency, air quality and hygiene.

In order to maximise the benefits of Zehnder ComfoAir heat recovery ventilation system the units should be used with Zehnder ComfoFresh ventilation components. Air is drawn into the Zehnder ComfoFresh ducting network in one of three ways:

  1. Fresh air is drawn in from outside via a wall vent

  2. Fresh air is drawn in from outside via an air intake tower and linked to the home using a ground loop.  The air is pre-heated or pre-cooled by the temperature of the earth (ComfoFond)

  3. A ground loop containing a brine solution is installed below the ground’s surface. The brine in the ground loop is pre-heated or pre-cooled by the temperature of the earth (ComfoFond-L option)

 

Benefits

  • Health
    Poor ventilation and air quality can lead to an increased incidence of asthma and allergic symptoms due to sensitivity to allergens such as dust mites, VOCs, pollen and mould.  By improving ventilation the concentration of these allergens can be reduced.

  • Comfort
    The Zehnder ComfoFresh air distribution network is designed to deliver a measured amount of air at low velocity. This ensures that fresh, clean air does not create drafts around the home. Due to the unique design of the components, noise related to air turbulence can be reduced thus limiting the intrusion of noise into the home environment.

  • Energy
    Efficiency Pressure losses are reduced owing to the smooth inner surface of the ducting.  Improving the efficiency of  your ducting means that your central system may not need to work as hard to achieve the desired airflow, both prolonging its life and helping to improve the energy efficiency of your system.

 

 

Components are an important part of the whole ventilation process and should be carefully considered at the planning & selection stage. 

Sign up for our Newsletter

Neorest Life Setting - Low Res.jpg
  • Facebook - White Circle
  • Instagram - White Circle
  • Twitter
  • LinkedIn
Versatile_Group_1_col_Rev_White_RGB.png

Versatile Group
Beechmount Home Park,
Navan, Co. Meath, C15 WR60

T: +353 (0)46 9029444
F: +353 (0)46 9027704
E: info@versatile.ie

Mon–Fri: 9am–5:30pm
Sat: 10am–5pm
Sun: Closed

© VERSATILE GROUP